ᐉ Spring clamp for hose 11 mm Metal P22-11 1 pc (P22 GLO): Buy 101310 Spring clamps, Automotive Products in Ukraine, Kyiv, Europe

The P22 GLO spring clamp marked P22-43 is sized for a 43 mm hose and presses it onto the pipe using the tension of a metal spring. There is no screw to tighten: the clamp holds the joint by itself once fitted. It comes as a single item, 1 pc per pack, so you can replace just the clamp that has lost its tension or was damaged when the hose was removed.

Spring hose clamp for 43 mm hose

The clamp is fitted where a hose joins a pipe, for example under the bonnet when replacing a coolant pipe, a hose or an old weakened clamp. The task is to match the clamp exactly to the outer diameter of the hose on the pipe, because a spring clamp has no adjusting screw.

Technical specifications

Type	Spring clamp
Hose size	43 mm
Material	Metal
Marking	P22-43
Part number	P22 GLO
Quantity	1 pc

WHAT TO CHECK BEFORE BUYING

Measure the outer diameter of the hose fitted on the pipe and compare it with the 43 mm size.
Compare the band width and the shape of the tabs with the old clamp on this joint.
Count how many joints need clamping: the clamp is sold as 1 pc.
Have spring clamp pliers ready so the tabs can be opened without slipping.

Key benefits

The spring keeps constant pressure on the hose with no screw to retighten.
The metal design suits hose joints in the engine bay.
Single-item packing lets you replace only the worn clamp.
The P22-43 marking makes it easy to find the same clamp again.

PROFESSIONAL TIP

Slide the clamp onto the hose before pushing the hose onto the pipe, then move it behind the pipe bead so the band presses the hose on a straight section.

FREQUENTLY ASKED QUESTIONS

Question: Will the P22-43 clamp fit a 43 mm hose?
Answer: Yes, it is sized for 43 mm. Measure the outer diameter of the hose while it sits on the pipe: if it differs noticeably, you need another clamp size.

Question: How is a spring clamp different from a worm-drive clamp?
Answer: A spring clamp holds the hose with its own tension and needs no screw tightening. Its force cannot be adjusted, so the size must match the hose diameter.

Question: Can the clamp be reused after removal?
Answer: Yes, if the spring is not bent and the metal shows no deep corrosion. Inspect the tabs and band: if you see cracks or weak tension, fit a new clamp.

Material	Stainless steel
Product type	Clamps & cable ties
Brand	APRO

ShopForCars Company carries out the return and exchange of goods of proper quality in accordance with the Law"On Protection of Consumer Rights".

Return and exchange periods

Return and exchange of goods is possible within14 days after the buyer receives the goods.

Return delivery goods is carried out at the expense of the buyer.

Return conditions for goods of proper quality

We will exchange the goods or return the money within 14 days in accordance with Art. 9 of the Law of Ukraine "On Protection of Consumer Rights".

According to the Law "On Protection of Consumer Rights", a company may refuse to exchange or return goods of proper quality to a consumer if they fall into the categories specified in the current List of non-food goods of proper quality that are not subject to return and exchange.

Please check the goods upon receipt for compliance with the declared characteristics, appearance, absence of mechanical damage. If you notice a discrepancy, contact the contact center operator. After receiving the claim regarding the appearance, as well as the presence of mechanical damage, will not be accepted.

Important aspects of a simple return of goods:

There should be no signs of use on the product;
The factory packaging must be intact, so unpack carefully and gently;
All documentation accompanying the product (label, operating instructions) must be intact;
The returned goods must not be covered with tape to avoid damage packaging.

Questions related to returns

If the product does not suit you, be sure to contact us by phone to explain in detail what exactly did not suit you. Return of goods at the expense of the company is carried out when the mistake occurred due to our fault. The address with the details for sending will be sent to you by SMS.

How does the refund work?

First, we check the returned goods to make sure that they have not been used and the integrity of the packaging is not broken. If everything is normal after a thorough inspection, the funds are returned to your bank card within 3 working days, or the goods are exchanged at the customer's request.